7
CARE
•
Every time after use, always clean
the mixer drum with a spade full of
gravel and water.
•
CAUTION! Always switch off the
machine and disconnect it from the
power supply before cleaning the
outside of the machine. If a water
jet or high pressure jet is used,
ensure that no water is splashed
into the motor.
•
Oil the bearings of the clips from
time to time via the designated
opening.
•
The rolling bearings of the mixer
drum and the drive pinion are
maintenance-free, no lubrication is
necessary.
•
The sprocket is made of a highly-
resistant wear proof composite
material, it is maintenance-free
and does not need to be lubricat-
ed. It significantly reduces the
noise produced by the machine.
Always disconnect the mains plug
before opening the panelling. The
mixer may only be operated when
the panelling is completely closed.
Caution!
Insulation-protected
machine. Protection class II is only
achieved if original insulation
materials are used for repairs and
if the insulation clearances are not
changed.en.
MAINTENANCE
The drive pinion of the mixer drum and
the driving belt are wear parts. To avoid
all failures/standstills, you should keep
a stock of spare parts.
SPARE PARTS
When ordering spare parts from autho-
rised dealers, always state the type
and type number of the cement mixer
machine (see type plate on the motor
hood), the required quantity, the article
name and the article number of the
required parts.
MODIFICATIONS
TO THE PRODUCT
We continuously endeavour to improve
the quality and effectiveness of our
products and therefore reserve the
right to make changes to the series
production of this product.
GUARANTEE
The manufacturer grants a 12-MONTH
guarantee for its cement mixer
machine starting on the date of pur-
chase. This guarantee promises free
replacement of faulty parts due to a
construction error or material fault. The
manufacturer reserves the right to
examine the faulty parts. There is no
guarantee for faults resulting from:
incorrect handling, poor use, the use of
third-party spare parts or poor mainte-
nance.
The manufacturer will not assume
liability if recommendations and
the safety information are not
observed.
GB
HMP 165L-180L_engl_Layout 1 26.06.14 12:54 Seite 7