4.3 Rack Mounting
The most secure mounting is on a universal rack shelf available from various rack manufactures or your music
dealer. The X34SW Active Crossover fits into one standard 19" rack unit of space. Please allow at least an add-
itional 4" depth for the connectors on the rear panel. Be sure that there is enough air space around the unit for
sufficient ventilation and please do not place the X34SW Active Crossover on high temperature devices such as
power amplifiers etc. to avoid overheating.
7
Balanced
b. In Line Connection
1. Apply the stereo program sources from the Mixer to the Input Connectors of Channel1 and Channel2.
2. Output the Low frequencies signal to the power amplifier.
3. Output the Mid frequencies signal to the power amplifier.
4. Output the High frequencies signal to the power amplifier.
6. Power up the X34SW first, then the power amplifier to run the system. While powered off, please ensure the power
amplifier is turned off first, then the X34SW.
5. APPLICATION
5.1 X34SW 3-Way Stereo Plus Subwoofer
To get such a typical application, configure your system and connect the wires in the following proper steps:
5. Output the sub frequencies signal to the power amplifier
Unbalanced
Tip
Ring
Sleeve
1
2
3
1
2
3
1
2
3
TIP RING SLEEVE
2
1
3
1
2
3
1
2
3
Cent e
r
Screen
1
2
3
1
2
3
1
2
3
1
2
3
2
1
3
2
1
3
Tip
Ring
Sleeve
1
2
3
Tip
Sleeve
1
2
3
TIP RING SLEEVE
TIP SLEEVE
1
2
3
1
2
3
For these applications, the X34SW Active Crossover provides XLR connectors to easily interface with most
professional audio devices. Follow the configuration examples below for your particular connection.
