Alto VOICE plus, User Manual

Page: 8 / 17

Through rotating this control, you can boost or attenuate the treble range by 8dB. You can use it to get rid
of high frequency noises or to boost the high harmonics of the human voice.
23. BREATH Control
Engaging this button is equal to adding the optimized EQ to signal path; oppositely, releasing the button
will allow you turn off the Optimized EQ function.
22. BYPASS/ACTIVE Switch
Rotate this control to boost or attenuate those frequencies around 1.2kHz from -12dB to +8dB, which can
affect most fundamental frequencies of human voice. It will give you a very wide panorama of sound effects.
24. PRESENCE Control
Rotate this control to boost or attenuate the signal level of selected frequency from -12dB to +8dB.
25. WARMTH Control
Adjust this control to select the right frequency you wish to polish, the adjustable range is from 130Hz to
720Hz
26. TUNING Control
Engaging this button will give you up to 4dB cut at 4kHz. It is used to reduce the unwanted noise in this
band.
27. ABSENCE Switch
3.1.4 DE-ESSER Section
28 29 30
31
Engaging this button is equal to adding the De-esser function to signal path; oppositely, releasing the
button will allow you turn off the function.
28. BYPASS/ACTIVE Switch
Rotate this control to select the frequency that you want to cut off, the adjustable range is from 2k7 to
12kHz.
29. CUT FREQUENCY Control
Rotate this control to set the threshold of De-esser from -20dB to 5dB. It's used to eliminate the hiss and
unnecessary vocal caused by approaching MIC too nearest.
30. THRESHOLD Control
It will light up when the De-esser is on.
31. ACTIVE LED
7
DE-ESSER
12
20
10
5
5
0
dB Hz
CUT FREQUENCY
6K2
4K6 8K6
3K1
10K
12K 2K7
15
ACTIVE
BYPASS
ACTIVE