6
Features
Rear Panel
1.
AC Input:
Use the included power cable to
connect this input to a power outlet. Make
sure the
Power
Switch
is set to
off
when
connecting or disconnecting the cable.
2.
Power Switch:
Use this switch to power the
loudspeaker on or off. Make sure the
Volume
knob is set to its minimum
(counterclockwise) position before turning it
on.
3.
Power LED:
This LED lights up when the
loudspeaker is on.
4.
Cooling Vent:
Keep the area in front of this
vent clear from obstructions. The fan behind
the vent cools the amplifier, preventing
overheating.
5.
Volume:
Turn this knob to adjust the
loudspeaker's volume.
6.
Input:
Use a standard XLR cable (not
included) to connect your audio source to
this input. Make sure to set the
Volume
knob to the correct position.
7.
Link Output:
Use a standard XLR cable (not
included) to connect this output to the input
of another loudspeaker (i.e., another TX
loudspeaker).
8.
Signal Limit LED:
This LED lights up when
the audio signal being sent to the
loudspeaker is "clipping" or distorting. If this
LED illuminates frequently or steadily,
reduce the volume of your audio source.
1
3
4
4
5
6 7
8
2
