48
SSB 400 W
SSE 400 W
SSB 480 W
SSE 480 W
Maintenance
Care
The battery is to be kept clean
and dry at all times in order to
avoid leak currents and
sparking.
For cleaning, remove batteries,
wear protective goggles and
protective clothing. Select the
place of installation so that
dirty rinsing water produced
during cleaning is channelled to
a suitable waste-water
treatment plant.
The cell plugs must not be
unscrewed.
The plastic parts of the
batteries may only be cleaned
with water or cleaning cloths
soaked in water without
additives. After cleaning, the
surface of the battery is to be
dried (compressed air, cleaning
cloths).
Storage
If batteries are taken out of
service for any length of time,
they are to be stored fully
charged in a frost-free room.
Due to the batteries’
spontaneous discharging,
recharging must be carried out
at regular intervals.
Maintenance-free, sealed
batteries
Maintenance-free batteries are
to be re-charged at quarterly
intervals.
Wet batteries
Wet batteries are to be
recharged at least once a
month.
Faults
If faults are found in the battery
or charging set, the technical
service staff is to be informed
immediately. Measured data
simplify troubleshooting and fault
elimination.
Disposal
Old batteries with recycling
symbols are re-usable
commercial goods and must be
channelled to the recycling
process.
All other batteries are to be
disposed of as hazardous waste
in accordance with the
regulations.
Warranty
Non-compliance with the
handling instructions, repairs
carried out with non-original
spare parts and attempts to
carry out the repairs by the
user lead to a loss of the right
to make claims under the
warranty.
