20
3 Before starting the cleaner
3.2
Transport
1. Grasp the handle with both
hands and tip the cleaner
until it stands on the two
wheels.
2. Wheel the cleaner to where
it is needed.
When transporting the cleaner
in elevators, observe current
safety regulations, in particular
with regard to carrying capacity.
When transporting the cleaner
in elevators, place the shaft in
an upright position to prevent it
from catching on elevator shaft
walls.
3.1
Assembly
For transport reasons, the
motor head and the shaft are
supplied not assembled.
1. Loosen the hexagon socket
screws (1) in the shaft
adjustment joint (2).
2. Insert the shaft gently as far
as possible into the shaft
adjustment joint.
3. Align the handle (3) parallel
to the wheels (4) so that the
open side of the shaft upper
housing faces the rear (5).
4. Retighten the hexagon
socket screws in the shaft
adjustment joint.
5. Wind the power cord around
the handle and the power
cord hook (6).
1
2
3
4
5
6
