21.10.2004
ALTO Danmark A/S
Fault Cause
Remedy
No spreading of foam.
The filter for detergent is
blocked up.
The suction hose is not
put into the detergent.
The concentration of the
detergent is set too low.
Clean the filter.
Put the hose into the can.
Set dosing valve for
detergent on pos. 4.
No pressure air in the
plant.
Inlet valve for pressure air
is not open.
The solenoid valve for
pressure air is blocked up
or defective.
Open inlet valve for
pressure air.
Clean or replace the
solenoid valve.
