9
3.3.2 POWER Switch
This switch turns the Mixer ON and OFF.
17
3.3.3 MAIN OUT
Both MAIN output and TAPE output are RCA type connectors. Through the MAIN output you can connect your
MX-20 to an amplifier. Through the TAPE output you can connect your MX-20 to a tape recorder.
18
3.3.4 INPUT
- PHONO input: Both Channels feature PHONO inputs including RIIA preamplifier for turntable. PIN (RCA) jacks
shall be used to connect the turntable.
- LINE input: Through these RCA type sockets you can connect a CD player, an MD player or any other high level
device such as Tape Recorder, DAT, etc,
Important Notice:
If you wish to connect LINE level devices into the LINE/PHONO input, make sure that the LINE/
PHONO switch is on LINE position otherwise the sensitive RIAA preamplifier built-in in the Phono input will be
overloaded and will produce distortion.
19
3.3.5 GND Screw
This grounding connection is provided for your turntables.
20
3.3.1 AC Inlet and Fuse Holder
16
This connector is meant for the connection of the supplied power cord. Please check the voltage accepted by the
unit and the voltage available from your AC sockets before connecting the unit to the mains.