![Alto MISTRAL 6000 Service Manual Download Page 4](http://html.mh-extra.com/html/alto/mistral-6000/mistral-6000_service-manual_2911667004.webp)
MODEL
MISTRAL6000
20Hz [email protected]%THD, Stereo Mode
8 ohms per channel(EIAJ)
1070W
4 ohms per channel (EIAJ)
1500W
Bridge Mono Mode
8 ohms, 1KHz, 0.1% THD (EIAJ)
3000W
Distortion (SMPTE-IM)
<0.05%
Frequency Response
20Hz-20KHz
±
1dB, -3dB points: 10Hz-60KHz
Damping Factor, 1KHz and below
>400 at 8ohms
Signal to Noise, 20Hz-20KHz
110dB
Voltage Gain
40
×
(31dB)
Input Sensitivity @ 4 ohms
6Vrms
Input Clipping
10Vrms (+22dB)
Input Impedance
10K ohms unbalanced, 20k ohms balanced 56 (36dB)
Controls
Front: AC switch, CH1 & CH2 Gain Knobs
Rear: Limiter, Bridge selector
Indications (1 per channel)
Power-on blue LED
Operation / Protection : Dual color (Green/Red LED)
Limit: Red LED
Clip: Red LED
Connectors, each channel
Input: Active balanced XLR
Parallel output: XLR
Output NEUTRIK
®
Spoken and Binding posts
Cooling
Continuously variable-speed fan, rear-to –front air flow
Load Protection
On / off muting, DC-fault load grounding relay: internal fault
fuses
Power requirements
200-240 (100-120) Vac 50~60Hz
Dimensions
19” (48.3cm) rack mounting, 5.2” (13.3cm) tall (3 rack
spaces)
17.8” (45.3cm) deep (rack mounting to rear support ears)
Net Weight
26.47Kg