The
▲
LTO LINK II is in fact the good solutions for many problems of the large scale sound
reinforcement systems and PA applications. And it can be used as a splitter or a mixer.
For splitter application, just apply the main signal input from the MAIN IN sockets, and
select the SPLITTER mode for each individual channel, then six mono outputs can be
gotten. By depressing the MAIN MIX button, two further outputs can be provided.
For mixer application, select the MIXER mode for individual channel, and feed the input
signal from the mono input, then six input signals can be mixed together, and output from
the MAIN OUT. By depressing the MAIN MIX button, two further inputs can be provided.
Features:
z
1 rack size.
z
SPLIT/MIX switch for each mono channel.
z
2 input,6+2 outputs splitter.
z
8 Balance/Pan control for each channel.
z
Main input and output level control.
z
MAIN LINK function allows to route the MAIN IN signal to MAIN OUT, vice versa.
z
Level meters for each stage.
z
XLR balanced connectors for 4 mono channels, and TRS type for another 2 mono
channels.
z
Dual voltage unit for global operation.
1. Introduction
--- 1 ---
Summary of Contents for LINK II
