Alto L-6, Ownes Manual, Page: 17 / 19

15
Main Mix Section
Noise (Bus noise) Fader 0 dB, channels muted: 85dBr (ref.:+4dBu)
+22 dBu unbalanced, 1/4" jacks
- to +15 dB
AUX Sends max out
+22 dBu
Distortion (THD & N)
Frequency response 10 Hz to 55 kHz, +/ 3 dB
0.005% at +4 dBu, 1 kHz
Gain range 0 dB to 60 dB (MIC)
115 dB
electronically balanced
10 Hz to 55 kHz, +/
3 dB
Distortion (THD & N) 0.005% at +4 dBu, 1 kHz
Sensitivity range
+15 dBu to +/-45 dBu
electronically balanced, discrete input configuration
9. TECHNICAL SPECIFICATION
Mono input channels
Microphone input
SNR (Signal to Noise Ratio)
Frequency response
Line input
Stereo input channels
Impedances
Line input Balanced
Frequency response 10 Hz to 55 kHz, +/ 3 dB
Distortion (THD & N) 0.005% at +4 dBu, 1 kHz
Microphone input
1.4 kOhm
All other inputs 10 kOhm or greater
Tape out 1 kOhm
All other output
120 Ohm
Equalization
DSP Section
Hi shelving +/ 15 dB @12 kHz
Mid bell
+/ 15 dB @ 2.5 kHz
Low shelving +/ 15 dB @ 80 Hz
A/D and D/A converters 24-bit
DSP resolution 24-bit
Type of effects Vibraflange, Funky, Rockabilly, Bigstage, Vibrato1-4,
Flanger1-4, Chorus1-4
Presets
16
Controls 16-position PRESET Selector, FX level,
REVERB level, CLIP LED
Max output
Noise (bus noise)
UNITY gain: 90 dBr (ref.:+4 dBu)
Fader 0 dB, all input channels assigned and set to
Fader 0 dB, channels muted: 100 dBr (ref.:+4 dBu)
AUX Returns gain range
Power Supply (AC/DC Adaptor)
Main voltage USA / Canada 100-120 V~, 60 Hz
Fuse
Physical
Shipping weight
2.7 Kg (5.95 lb)
Europe 210-230 V~, 50 Hz
U.K. / Australia 240 V~, 50 Hz
Net weight
1.4 Kg (3.09 lb)
15 Watts
Power Consumption
Dimension(W D H)
185 mm 230 mm 35/55 mm