
12
DSP
TO MAIN
DSP
TO MON
PRESETS
DSP
PRESETS:
VARIATIONS
+10dB
+10dB
CLIP
MUTE
DSP
MUTE
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
-
8
-
8
0
dB
FOOT
SW.
14. DELAY
16. CHORUS
15.
FLANGER
5. LARGE ROOM
13. CHORUS
12. FLANGER
11. STEREO DELAY
10. MONO DELAY
9. SPRING REVERB
8. TAPE REVERB
7. PLATE
6. SMALL ROOM
4. SMALL HALL
3. LARGE HALL
2. VOCAL 2
1. VOCAL 1
29
This switch is used to activate/deactivate the effect facility.
Sometimes, you can also use the following FOOT SW jack for
convenient operation
DSP MUTE Switch
30
This LED lights up when the input signal is too strong. In case of
the digital effect module being muted, this LED also lights up.
CLIP/MUTE LED
31
This control is used to control the volume of
signal sent to
monitor mix, which can be varied from -
to +10dB.
effect
DSP TO MON Control
32
33
24
Pushing this switch to left will route the signal from TAPE IN to
CH9~10 path, and the signal will be affected by channel level
control and main level control, while to right will route the signal
to main mix bus, the signal will be affected only by main level
control.
TAPE TO Select Switch
25
APM80.1000 features dual RCA jacks for 2-track in (left and
right). If you wish to listen to your mix from a tape recorder, DAT
or cassette, please use these tape input jacks. Depending on the
setting of TAPE TO select switch, you can assign the signal coming
from the tape recorder (DAT or cassette) to CH9~10 path or main
mix bus.
2-TRACK IN
24
25
26
26
APM80.1000 features dual RCA jacks for 2-track out (left and
right). Via these jacks, you can route the main mix signal into a
tape recorder or DAT for recording.
2-TRACK OUT
27
Adjust this knob to select the right effect you wish to perform.
There are total 16 options for you: several kinds of reverb, mono
and stereo delay, modulation effects, and versatile two-effect
combination.
PRESETS Control
4.4 DSP Section
APM80.1000 features the special 256 position multi-effect,
further details please refer to following content.
28
VARIATIONS Control
27
28
29
30
31
Since you have selected the preferable effect, the next step, please
go with the fine consideration, there are also total 16 variations for
each preset, and each variation has been designed modifying several
parameters.
Summary of Contents for APM80.1000
Page 8: ...4 CONTROL ELEMENTS 7 ...