Alto aMictube, Service Manual

Page: 14 / 33

---------------------------------------------------------------------------
NCDrill File Report For: AMTUBEPU.PCB
9-Mar-2002 18:30:07
---------------------------------------------------------------------------
Layer Pair : TopLayer to BottomLayer
ASCII File : NCDrillOutput.TXT
EIA File
: NCDrillOutput.DRL
Tool Hole Size Hole Count Plated Tool Travel
---------------------------------------------------------------------------
T1
24mil (0.6096mm) 1 6.10 Inch (155.01 mm)
T2 28mil (0.7112mm) 14 10.41 Inch (264.49 mm)
T3 31mil (0.7874mm) 57 20.11 Inch (510.86 mm)
T4 39mil (0.9906mm) 29 14.11 Inch (358.42 mm)
T5 47mil (1.1938mm) 4 10.33 Inch (262.28 mm)
T6 59mil (1.4986mm) 12 12.09 Inch (307.05 mm)
T7 63mil (1.6002mm) 4 10.41 Inch (264.44 mm)
T8 110mil (2.794mm) 2 9.26 Inch (235.31 mm)
T9 126mil (3.2004mm) 1 9.77 Inch (248.28 mm)
T10 71mil (1.8034mm) 4 NPTH 10.90 Inch (276.85 mm)
---------------------------------------------------------------------------
Totals
128 113.50 Inch (2883.01 mm)
Total Processing Time : 00:00:01
AMTUBEPU Top Scilkscreen
AMTUBEPU Drill Drawing