- Analog Output Level Potentiometer :
The output level control sets the level
going to the amplifier or mixer from this apparatus.
- "Process Bypass" Switch:
The "Process Bypass switch allows to bypass
"
the
digital process so to have the input signal available on the outputs.
c. LED and Illuminated Power Switch
- Digital Saturation LED :
Displays the signal level coming into the input during
normal operation, if the signal level is too high, this LED will light and you will
begin to hear the signal distortion.
- Power On/Off Switch :
Turns the apparatus on and off.
7
3.2 Analog Connections (Back Panel)
-Analog Input Level Potentiometer :
The input level control sets the main input
gain, before the signal reaches the input bus. It controls both the Left ( Mono)
and Right input levels simultaneously.
b. Analog Levels
a. Program and Variations Selections
- Program Select Knob:
The Program Select Knob is used to choose the program
you wish to perform.
- Variations Select Knob :
Each program on this apparatus has the AGC parameter
which can be adjusted by means of this knob.
a. Analog Inputs/Outputs
- Inputs :
These are 1/4" unbalanced phone jacks which connect to sources
such as Channel inserts of a mixing console. They may be used with Line
input
For mono application, use the Left / Mono input.
levels up to 8/9 dBu.
The Left / Mono input jack is normal to the Right jack. This means that when nothing
is plugged into the Right input jack, the signal present at the Left / Mono input is
routed to the Right as well.
9 VAC
POWER
~
BYPASS
OUTPUT
INPUT
LEFT
RIGHT
LEFT(MONO)
RIGHT
SIGNAL
OUTPUT
INPUT
24 32 bit Digital Compressor Module
10
0
10
MASTER
MIXDOWN
JUMPING UP
DANCE
CLEAN
KICK DRUM
ACOUSTIC
AGC PURE
VARIATIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
POWER
CLASSIC 8
CLASSIC 7
CLASSIC 6
CLASSIC 5
CLASSIC 4
CLASSIC 3
CLASSIC 2
CLASSIC 1
Comp
LTO
R
TM
COMP
BYPASS
ON OFF
