blank, after press the MENU to lock, it has the output.
(Note: the Channel on Group 1~8 only scan for 1~11; the Group 9~12 only scan 1~10.
12. LCD test:
Group 1 Channel 1 RF display in LCD AF display in LCD
12.1. ANT.A display 798,000MHZ, the battery status is full.
12.2. Press MENU key, it will appear Group, Channel, PL, UNNU, and SI 1. in return.
12.3. Press the MENU key, it will display Group, up and down have corresponding
variation, at last, press the MENU key to lock, and it will appear static condition.
12.4. When the signal from ANT.A input, the LCD display the ANT.A, the signal from
ANT.B input, the LCD display ANT.B.
12.5. During press the key, check if the LCD will appear abnormal problem, and it has
corresponding variation.
13. Turn on and down the unit for 3 times, the unit should without the crashed problem. The
display will be decreased for 2-3 seconds in delay.
14. The consumption current is less than 230mA.
15. SQ factory presets: set in 5 condition
- 21 -
