Page 9
Work Light II
Installation & Users Manual
Cleaning and Care
WARNING! All cleaning should be performed with power completely removed from the lumi-
naire. Never remove protective covers when luminaire is powered. Wear appropriate protective
eye wear and gloves when cleaning the fixture. All service and maintenance, other than described
herein, should be performed by a qualified technician or Authorized Service Center.
AT NO TIME
SHOULD THE LED BE TOUCHED.
WARNING! Under no circumstances should ammonia-based cleaners, acetone, or other harsh
solvents be used on or near the LED Work Light. These types of cleaners or solvents can
permanently damage the fixture.
WARNING! Disassembly (other than as described herein), alterations, unauthorized service, etc.
will void the product warranty. Contact your local Altman Lighting office
Special Cleaning and Care Instructions
Being a solid-state fixture, and unlike most fixtures, the LED Work Light requires very little
routine maintenance by the user
If you have any questions regarding the use or care of your LED Work Light, please contact
Altman Lighting technical support (
) or your local Authorized Dealer.
MPORTANT
! The Altman Lighting LED Work Light is a solid state, convection cooled luminaire.
As with any solid state luminaire it is important that these units not run in a continuous 24/7
operation but be allowed sufficient OFF time during their operation.
Service and Maintenance
MPORTANT
! For all other service and maintenance issues, please contact your local Altman
Lighting office at
