Lighting
BRINGING IMAGINATION TO LIGHT
Lighting
BRINGING IMAGINATION TO LIGHT
M a n u a l
O P E R A T I O N
Spectra Series
57 Alexander St., Yonkers, NY 10701
Tel: 914-476-7987
Visit our website at www.altmanlighting.com
© 2012 Altman Stage Lighting, Inc.
14
M
-
+
DMX Mode:
Set/read the DMX start address of the
fi
xture
Change network resolution to 8 or 16 bit
Select the interpolation mode
Show Mode:
• Selecting one of the 8 pre-programmed shows
• Change the speed of the selected show
• Turn Chase on or o
ff
Note: When the Spectra Strip is in Show Mode, the
fi
xture will not respond
to any incoming DMX signal!
Select Preset
Select one of the pre-programmed presets: Concert or Theater:
CON1-CON6: Concert Mode.
• Concert mode groups individual LED Cells into groups. CON1 is
all LED cells responding to channels 1-4(RGBA). CON6 is each cell
responding to channels 1-48(RGBA).
THE1-THE6: Theater Mode
• Theater Mode groups cell by traditional border light 3 circuit / 4
circuit emulation.
Set Intensity:
• Sets the maximum intensity for the
fi
xture.
• Default is 255 or maximum intensity.
Dimming Curve*:
Selects the output dimming curve. Options are:
• LIN - Linear
• LOG - Logarithmic
• SQUA - Square
Default is LOG
Control Mode Selection
Preset Selection
To operate the Spectra Strip, one of two control modes must be selected:
DMX Mode
or
Show Mode
(also
known as Stand-alone mode).
Spectra Strip Presets govern the operation of the
fi
xture including how each cell responds, the maximum
intensity the
fi
xture will output and the dimming curve the
fi
xture will operate with.
Hold for 5 sec.
MODE SELECTION
PRESET SELECTION
Display o
ff
Display o
ff
M
+
+
DMX
SHOW
SETMODE
PRESETS
INTENSITY
DIMCURV
CON1
CON2
CON3
CON4
CON5
CON6
THE1
THE2
THE3
THE4
THE5
THE6
-
+
0 » 255
-
+
LIN
LOG
SQUA
-
+
M
M
M
M
