UT260-041
User’s Guide
400-0616-001
7
7.1.3 Remote Control
A remote control is provided for installations where it is not practical for direct cable control. For best results, have a
direct line of sight for the remote IR signal to reach the IR receiver on the switcher or use an IR extender.
Access to the main menu displays the system information. The ARC feature can be enabled or disabled as well.
Following are the main remote control functions:
1, 2, 3, 4
:
Press to select input port. If no signal is present on the input, the ShareTime standby screen
is displayed.*
Menu
:
Press to enter into menu selection, an OSD will appear from the menu
▲►▼◄
:
Use these but
tons to select/adjust OSD menu’s objects.
Enter
:
Press to confirm a selection.
OSD menu
Press the OSD button from the device or MENU button from the remote control to bring
up the OSD on the display
Press [
▲|▼] to highlight an option
Press [
◄|►] to select the option
Press [ENTER] to confirm /exit the selection
7.2 ShareTime Controller Configuration Options
(options in
BOLD
are required)
TOUCH sensor behavior (times are approximate):
Action
LED
Upon Release
Touch and
Release
Green
Set as active source.
Hold +3 sec
Flash Red
Return to normal operation
Hold +5 sec
Red
Turn off TV and ShareTime Controllers
Hold +8 sec
Blue
Enable TV detection and reset
Hold +11 sec
Yellow
Disable TV detection and reset
Hold +14 sec
Off
Return to normal operation
CONFIGURATION button behavior (times are approximate):
Action
LED
Upon Release
Press &
Release
ON
The LED starts flashing to allow TV off time selection.
Press when flashing to set shutdown timeout:
Pink = Never Green = 30 sec
Blue = 1 min
Yellow = 2 min
Cyan = 5 min
Hold 2 sec
Blue
Flash version number of times; color varies by version.
Hold 4 sec
Yellow
Flash the physical address. Physical address = A.B.C.D.
A=blue, B=red, C=green, D=yellow
Hold 6 sec
Cyan
Test the CEC IN circuit. The LED flashes green 3 times
indicating the circuit is working; red if there is a failure.
Hold 8 sec
Red
Set select plus de-select operation then reset.
Hold 10 sec
Magenta
Set for active operation only; no de-select.
Hold 12 sec
OFF
Return to normal operation; no changes.
