UT240-325S
User’s Guide
400-0594-001
1
Welcome!
We greatly appreciate your purchase of a UT240-325S. We
are sure you will find it reliable and simple to use. Superior
performance for the right price, backed by solid technical and
customer support is what Altinex has to offer.
We are committed to providing our customers with Signal
Management Solutions
®
to the most demanding audiovisual
installations at competitive pricing and welcome you to join the
ranks of our many satisfied customers throughout the world.
1. Precautions and Safety Warnings
Please read this manual carefully before using your
UT240-325S. Keep this manual handy for reference. These
safety instructions are to ensure the long life of your
UT240-325S and to prevent fire and shock hazards. Please
read them carefully and heed all warnings.
1.1 General
•
There are no user serviceable parts. Qualified Altinex
service personnel must perform all service.
1.2 Handling
•
To prevent fire or shock, do not expose to water or
moisture. Do not place in direct sunlight, near heaters, or
heat-radiating appliances, or near any liquid. Exposure to
direct sunlight, smoke, or steam can harm internal
components.
•
Handle carefully, dropping or jarring can cause damage.
•
Do not pull any cables attached to the UT240-325S.
•
Do not place heavy objects on top of the UT240-325S.
1.3 Cleaning
•
Unplug the UT240-325S before cleaning.
•
Clean only with a dry cloth. Never use strong detergents or
solvents such as alcohol or thinner. Do not use a wet cloth
or water to clean the unit. Do not open the unit to clean.
1.4 FCC Notice
•
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in
accordance with instructions found herein, may cause
harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause
harmful interference in which case the user will be required
to correct the interference at his own expense.
•
Any changes or modifications to the unit not expressly
approved by ALTINEX, Inc. could void the user’s authority
to operate the equipment.
2. Installation Procedures
The UT240-325S may install horizontally or vertically as shown. Typically, units install under a tabletop,
but may also install inside a desk opening, or on the back of a desk or podium.
Step 1. Locate the best position for the UT240-325S, but do NOT mount it until cables are ready.
Step 2. Prepare the mating cables using high-quality cables for best results and durability. Make sure
the cables are long enough to allow for a service-loop and so they may be routed neatly
beneath the table to their destinations.
Step 3. Prepare network cables using the CAT-6 (RJ-45) connectors provided with the unit. The
connectors are high-quality snap-in connectors and do not require any tools for installing them
into the UT interconnect.
Step 4. Secure the unit under the table using the metal screws provided with the unit.
Step 5. Make any necessary connections to the snap-in connectors.
Step 6. Use cable-ties to secure the cables to the mounting shelf.
Insert the ties through the holes on the bottom of the unit.
Step 7. Use the cable clamps provided to secure the cables to the bottom of the table/desk.
3. Limited Warranty/Return Policies
Please see the ALTINEX website at
for details on warranty and return policies.
Installation Options
Note: The connectors are provided without cables.
We recommend a telecommunications
contractor wire the network connectors and
verify operation before installing.
