TP315-101
User’s Guide
400-0647-003
3
5. About Your TP315-101
HDMI over 2-conductor cable
Automatic input/receiver detection
HDMI resolutions 720p, 1080i, and 1080p
Transmission up to 300 m
IR pass-through control
Local monitor output
The TP315-101 HDMI over Anywire transmitter allows the transmission of 1080P HDMI signals up to 300 m using a simple
2-conductor cable. A single transmitter is capable of driving up to 4 receivers using either 4 individual wire pairs over 300 m each, or
by daisy chaining the receivers. The only restriction being the wire pair from the transmitter to each receiver cannot be bundled
together as crosstalk will occur.
The TP315-101 is an economical solution for many audiovisual installations. The 2 wire solution makes installation easy without the
need to cut and splice wires and install expensive connectors or purchase costly cables. Simply route your wires, cut and trim the
installation and connect to the terminals. That's it!
The unique design of the Anywire Transmitter provides stable video transmission over greater distances than other designs. IR
pass-through for receiver side to transmitter side control is provided without corrupting the HDMI signal during transmission of IR
signals.
Operation does not require any user control or interaction. Simply connect the HDMI input and the transmitter scans for the receiver
and when detected automatically pairs to the receiver and begins video transmission.
A local video output is provided to support a local monitor. The local monitor allows the user on the transmitter side to know what is
being presented on the far side of the installation.
Summary of Contents for TP315-106
Page 4: ...TP315 101 User s Guide 400 0647 003 4 6 Application Diagrams Diagram 1 Typical Setup...
Page 5: ...TP315 101 User s Guide 400 0647 003 5 Diagram 2 Internal View...
Page 6: ...TP315 101 User s Guide 400 0647 003 6 Diagram 3 Dimensions...
Page 7: ...TP315 101 User s Guide 400 0647 003 7 Diagram 4 Multiple Receiver Setup...
