background image

DISTRIBUTION AMPLIFIERS

400-0449-005

2

PRECAUTIONS / SAFETY WARNINGS

1

Please read this manual carefully before using your 

DA103-107/110

. Keep this manual handy for future 

reference. These safety instructions are to ensure 
the long life of your 

DA103-107/110

and to prevent 

fire and shock hazards. Please read them carefully 
and heed all warnings.

1.1  GENERAL

Qualified ALTINEX service personnel or their 
authorized representatives must perform all 
service.

1.2  INSTALLATION

To  prevent fire and shock, do not expose this 
unit to water or moisture. Do not place the 

DA103-107/110

in direct sunlight, near heaters 

or heat-radiating appliances, or near any liquid. 
Exposure to direct sunlight, smoke, or steam can 
harm internal components.

Handle the 

DA103-107/110

carefully. Dropping 

or jarring can damage the unit.

Do not pull any cables that are attached to the 

DA103-107/110.

1.3  CLEANING

Clean only with a dry cloth. Never use strong 
detergents or solvents, such as alcohol or 
thinner. Do not use a wet cloth or water to clean 
the unit. Do not open the unit to clean.

1.4  FCC NOTICE

This device complies with Part 15 of the FCC 
Rules. Operation is subject to the following two 
conditions: (1) This device may not cause 
harmful interference, and (2) this device must 
accept any interference received, including 
interference that may cause undesired 
operation.

This equipment has been tested and found to 
comply with the limits for a Class A digital 
device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable 
protection against harmful interference when the 
equipment is operated in a commercial 
environment. This equipment generates, uses, 
and can radiate radio frequency energy and, if 
not installed and used in accordance with the 
instructions found herein, may cause harmful 
interference to radio communications. Operation 
of this equipment in a residential area is likely to 
cause harmful interference in which case the 
user will be required to correct the interference 
at his own expense.

Any changes or modifications to the unit not 
expressly approved by ALTINEX, Inc. could void 
the user’s authority to operate the equipment.

Summary of Contents for SIDEKICKER DA103-107










Reviews: