RT300-126
User’s Guide
400-0707-001
7
Diagram 5: CNK200/221 Installation
Install the bracket with the RT300-126 in a position such that the retact cable is under the grommet openings on CNK plates.
Pull the cable through the bottom of the CNK body and faceplate.
7. Operation
7.1 Accessing the RT300-126 Displayport Cable
Retractor
After installation, no further configuration is needed. To
connect, simply open the CNK bezel and pull on the retractable
cable.
Connect to a desired source. When finished, disconnect the
cable and gently pull and release cable and it will retract back
into the bezel.
8.
Troubleshooting
Guide
The RT300-126 Displayport cable retractor was carefully
tested during production. We would like to offer the following
suggestions:
•
Make sure that no cable or power cord is damaged or
pinched. If there has been damage, do not use the
CNK200 or the retractable cable.
•
RT300-126 is a precision retractor. Once cable
reaches the end, do not continue pulling on it. Doing
so will damage cable and the retractor assembly.
•
Please call the Altinex Customer Service Department
at (714) 990-2300 to have the unit repaired
.
