SPECIAL APPLICATION
400-0384-001
25
7.3 SUMMARY OF COMMANDS
1)
[STATUS]
Display status of the card.
2)
[FRESET]
Perform factory reset.
3)
[VER]
Display card information.
4)
[TEST]
Test memory IC's.
5)
[WAIT]
Suspend operation.
6)
[RDI]
Read input status.
7)
[RDRL]
Read relay status.
8)
[WRRLx
1
x
2
x
3
x
4
] Set relays individually.
9)
[WRRLk=x]
Set one or all relays.
10) [WRIN]
Assign sub to input port.
11) [RDIN]
Read sub to be executed.
12) [WRS]
Write a subroutine.
13) [WRLS]
Write a subroutine label.
14) [RDS]
Display subroutine data.
15) [RDLS]
Display a subroutine label.
16) [CLRS]
Clears subroutine content.
17) [CLRLS]
Clears subroutine's label.
18) [SUB]
Execute a subroutine.
19) [HELP]
Show RS-232 commands.
20) [SETTIME]
Set the time of day.
21) [SETDAY]
Set the day of the week.
22) [SETDATE]
Set the day/month/year.
23) [RDTIME]
Read internal time clock.
24) [RDDAY]
Read day of the week.
25) [RDDATE]
Read date from clock.
26) [SET1ALRM1]
Set Alarm 1 Mode 1.
27) [SET1ALRM2]
Set Alarm 1 Mode 2.
28) [SET1ALRM3]
Set Alarm 1 Mode 3.
29) [SET1ALRM4]
Set Alarm 1 Mode 4.
30) [SET1ALRM5]
Set Alarm 1 Mode 5.
31) [SET1ALRM6]
Set Alarm 1 Mode 6.
32) [SET2ALRM1]
Set Alarm 2 Mode 1.
33) [SET2ALRM2]
Set Alarm 2 Mode 2.
34) [SET2ALRM3]
Set Alarm 2 Mode 3.
35) [SET2ALRM4]
Set Alarm 2 Mode 4.
36) [SET2ALRM5]
Set Alarm 2 Mode 5.
37) [ALRMON]
Activate Alarm.
38) [ALRMOFF]
Deactivate Alarm.
39) [RDALRM]
Read alarm settings.
40) [ALRMn=SUBk] Set Alarm Dependencies.
41) [WRM]
Save RS-232 data.
42) [WRLM]
Write memory label.
43) [RDM]
Display memory data.
44) [RDLM]
Display memory label.
45) [CLRM]
Clears memory location.
46) [CLRLM]
Clears memory label.
47) [MODERSI]
Set internal baud rate.
48) [RDRSI]
Read internal baud rate.
49) [OUTRSM]
Memory via RS-232 ext.
50) [OUTBSM]
Memory via RS-232 int.
51) [OUTPDPM]
Memory to plasma main.
52) [OUTVCM]
Memory to plasma video.
53) [SENDRS]
Send data via external bus.
54) [SENDBS]
Sends data via internal bus.
55) [SENDPS]
Send data to display card.
56) [SENDVS]
Send data to video card.
57) [MDON]
Motion detector enabled.
58) [MDOFF]
Motion detector disabled.
59) [MD1]
Set approaching motion.
60) [MD0]
Set departing motion.
61) [SETMD]
Set detector trigger value.
62) [RDMD]
Read motion det. settings.
63) [SIDn]
Set ID of cards.
64) [SIDnCi]
Set ID of a single card.
65) [RSN]
Read ID number.
