MT315-101
User’s Guide
400-0663-001
3
5. About Your MT315
–101
•
HDMI over 2-conductor cable
•
Automatic input/receiver detection
•
HDMI resolutions 720p, 1080i, and 1080p
•
Transmission up to 984 ft. (300 m)
•
IR pass-through control
•
Local monitor output
The MT315-101 HDMI over Anywire transmitter allows the transmission of 1080P HDMI signals up to 300 m using a simple 2-conductor
cable. A single transmitter drives up to 4 receivers using either 4 individual wire pairs over 300 m each, or by daisy chaining the
receivers. The only restriction being the wire pair from the transmitter to each receiver cannot be bundled together as crosstalk will
occur.
The MT315-101 is an economical solution for many audiovisual installations. The 2-wire solution makes installation easy without the
need to cut, splice, and install expensive connectors or purchase costly cables. Simply route your wires, cut and trim the installation
and connect to the terminals. That's it! In many cases, obsolete cables already available in the building can be used for the 2-wires.
Anywire’s unique design provides stable video transmission over greater distances than other designs. IR pass-through for receiver
side to transmitter side control is provided without corrupting the HDMI signal during transmission of IR signals.
Operation does not require any user control or interaction. Simply connect the HDMI input and the transmitter scans for the receiver
and when detected automatically pairs to the receiver and begins video transmission. A local video output is provided to support a local
monitor. The local monitor allows the user on the transmitter side to know what is being presented on the far side of the installation.
