MULTI-TASKER™
400-0362-003
21
3: STATUS
Equivalent to the [C] command.
Return the card status.
4: HELP
This is equivalent to the [HELP] command.
It displays a list of commands available for
the
MT105-120/121
along with a brief
description.
ESC
Return to the parent menu.
7.4.5 MENU MODE EXAMPLES
All MENU MODE examples assume an
MT105-120
is installed in slot #4. Start by
clicking the mouse in the Terminal window.
Press ENTER and a list of available cards will
be displayed.
NOTE When entering numeric values (not
selecting menu items) the system may
echo each character as it is typed. For
example, entering a delay time of 03
may appear as 0033 on the screen. This
is a property of the software being used
to control the system.
1. Connect Input 2 to Output 2
Follow the keystrokes below to connect Input 2
to Output 2.
Enter
List available cards
4
Select MT105-120 in slot #4
1
Select CONTROL Menu
5
Select IN-OUT Select
2
Input 2
2
Output 2
"ok" is displayed
S
New connections are displayed
ESC
Return to CONTROL Menu
ESC
Return to the MAIN Menu
2. Turn OFF Output 1
Starting from the main menu, turn OFF
Output 1. Follow the keystrokes below.
1
Select CONTROL Menu
4
Select ON/OFF Menu. The Output
ON/OFF
statuses are displayed.
The
current setting is in "( )" next to the
output number. In this case, Output 1
shows are ON.
1
Toggle Output 1 from ON to OFF.
The card will respond with the
feedback "OFF" and then "ok".
S
Redisplay the status of all outputs.
ESC
Return to the CONTROL Menu.
ESC
Return to the MAIN Menu
3. Set Sync Delay for Output 1 to 2 seconds.
Starting from the Main Menu, set the Sync
Delay for Output 1 to 2 seconds. Follow the
keystrokes below.
2
Select SETUP Menu
3
Select SET SYNC DELAY
1
Select SDL1 (Output 1)
8
Enter 8 (x250mS)=2 sec
ESC
Accept 2 sec value. Redisplay the
SDL settings for all the outputs.
ESC
Return to SETUP Menu
ESC
Return to the MAIN Menu
4. Add Card 4 to Group 1
Starting from the Main Menu, make the
MT105-120/121
part of Group 1. Follow the
keystrokes below.
2
Select SETUP Menu
1
Select SET GROUP ID
1
Select ASSIGN GROUP ID
1
Group 1. The card will feedback
"G1=C4".
ESC
Return to Group Menu
ESC
Return to SETUP menu
ESC
Return to the MAIN Menu
