background image

MULTITASKER

400-0443-004

3

ABOUT YOUR MT115-111

2

MT115-111

Dual Twisted Pair Receiver to 
Computer/Component Video+ Audio, 

The 

MT115-111

provides a means of receiving 

computer or component video and audio signals 
over Twisted Pair-type (CAT-5) cable when used 
together with an ALTINEX Twisted Pair Video 
Transmitter, such as the 

MT115-110

or 

TP115-110

.

The 

MT115-111

offers two 15-pin HD female 

outputs and two 3.5 mm audio outputs, one for
each of the inputs. The RJ-45 inputs receive the 
differential video and audio signals generated by 
the Twisted Pair transmitter. The 

MT115-111

also 

offers video equalization for long cable lengths. The 
equalization adjustment may be set for either 
hardware or software (RS-232) control.

Additionally, the 

MT115-111

offers the option for 

video gain adjustments through RS-232 control or 
the gain may be set to a value of one for hardware 
control.

As an added feature, the 

MT115-111

offers the 

option of selecting a Sync-on-Green (SOG) output. 
The SOG feature is a simple switch setting that 
may be set for SOG or standard RGBHV.

The latest generation of Twisted Pair devices uses 
an innovative, patented technology* developed by 
ALTINEX. The new signal processing technology 
allows transmitting and receiving fully equalized 
computer video signals, stereo, and audio signals 
over long distances.

TECHNICAL SPECIFICATIONS

3

Specifications are subject to change.
See 

www.altinex.com

for up-to-date information.

FEATURES/
DESCRIPTION

MT115-111

Inputs

CAT-5/6 Twisted Pair

(2) RJ-45 female

Output

Video

(2) 15-pin HD female

Audio

(2) 3.5 mm jack

Compatibility

Signal Types

ALTINEX Standard for

Twisted Pair

Video Signal 
Resolutions

VGA through UXGA

480p through 1080i

Recommended Max.  
Cable Lengths

Note: Measurements 
made using ALTINEX 
low-skew cable, 
CB3150PV.

VGA:

640x480@60Hz

900 ft (274 m)

XGA:

1024x768@60Hz

700 ft (213 m)

SXGA: 1280x1024@60Hz

650 ft (198 m)

UXGA: 1600x1200@60Hz

600 ft (183 m)

Table 1. 

MT115-111

General

MECHANICAL

MT115-111

Enclosure Slots

One

Weight

0.5 lb (0.23 kg)

T

°

Operating

10

°

C-35

°

C

T

°

Maximum

50

°

C

Humidity

90

%

non-condensing

MTBF (calculations)

40,000 hrs (min.)

Table 2. 

MT115-111

Mechanical

* US Patent 7,065,190

Summary of Contents for Dual Twisted Pair Receiver to Computer / Component Video + Audio MT115-111






















Reviews: