AC301
AC301
AC301
AC301----109
109
109
109
User’s Guide
400-0547-002
7
2. <RDXXYYZ>
This command reads EDID memory from the device connected to the
AC301-109's 15-pin HD connector.
Command Format: <RDXXYYZ>
XXYY = Starting memory address (range A000 to A0FF)
Z
= Memory locations to read (decimal 1 to 8)
Example:
Read the data in memory location A000 by sending the following
command:
<RDA000> or <RDA0001>
Read the data in memory location A000 through A007 by sending the
following command:
<RDA0008>
3. <WRXXYYZZ>
This command writes EDID data to the device connected to the
AC301-109's 15-pin HD connector.
Command Format: <WRXXYYZZ>
XXYY = Starting memory address (range A000 to A0FF)
ZZ
= Hex data (1 to 64 bytes)
Example:
The following example sends a single FF byte to location A000:
<WRA000FF>
The following example requires 2 commands to send 128 bytes to the
attached device. The first sends 64 bytes (A000 through A03F). The
second command sends 64 bytes (A040 through A07F).
<WRA000
<WRA000
<WRA000
<WRA00000FFFFFFFFFFFF0041D009FF820301012D0A01020C241DF
FFFDE50A3544C99260F5054FFFF808BC081807140A940814081C0D1
C0D140047480D072A03F50A2D0>
>>
>
<WRA040
<WRA040
<WRA040
<WRA0402300720E110A011E302A00B05120243050881300671F1100
001E011D568051001A3038881300671F1100001E000000FE00414C544
94E4558204544494431003E>
>>
>
4. <LRNIR>
This command receives IR data from a remote control to be used for
programming ALTINEX systems such as Neutron and Showtime. The
IR IN LED flashes red while data is being received. If an IR signal is
not received, the command will time out in about 10 seconds.
Command Format: <LRNIR>
Example:
Send the command <LRNIR> and the AC301-109 responds as follows:
READY TO LEARN
At this time, point the remote control at the IR receiver and press the
function on the remote control you want to learn. The AC301-109
processes the IR data and returns the 1,000 character IR code string
inside "[ ]" brackets as in the following example.
[0000000000000000000000000000000000000000000000000003FFF
FFFFFFFFFFFFFFFFFFFFFF8003FFE001FFF8003FFC000FFF000FF
FC001FFE0007FF8007FFFFFFFFF8003FFFFFFFFF0007FF8001FFF
FFFFFF8003FFFFFFFFF8007FFE000FFFFFFFFFC003FFF0007FF80
01FFE000FFFFFFFFFE000FFFFFFFFFE000FFFFFFFFFC003FFF000
7FF8001FFE001FFF8003FFFFFFFFF0007FFC001FFE0007FF8003F
FFFFFFFF8003FFFFFFFFF8003FFFFFFFFF0007FFFFFFFFF0007FF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000000000
0000000000000000000000000000000000007FFFFFFFFFFFF000FFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF]
5. <HELP>
This command displays information available for the AC301-109
interface commands.
Command Format: <HELP>
Example:
In order to display the RS-232 commands available for the AC301-109,
send the command<HELP>. The commands along with a brief
description will be displayed.
7.6. Summary of Commands
1)
1)
1)
1)
<VER>
<VER>
<VER>
<VER>
Display firmware version
Display firmware version
Display firmware version
Display firmware version
2)
2)
2)
2)
<RDXXYYZ>
<RDXXYYZ>
<RDXXYYZ>
<RDXXYYZ>
Read EDID data from device
Read EDID data from device
Read EDID data from device
Read EDID data from device
3)
3)
3)
3)
<
<<
<WRXXYYZZ>
WRXXYYZZ>
WRXXYYZZ>
WRXXYYZZ>
Write EDID data to device
Write EDID data to device
Write EDID data to device
Write EDID data to device
4)
4)
4)
4)
<LRNIR>
<LRNIR>
<LRNIR>
<LRNIR>
Learn IR from remote control
Learn IR from remote control
Learn IR from remote control
Learn IR from remote control
5)
5)
5)
5)
<HELP>
<HELP>
<HELP>
<HELP>
Display available commands
Display available commands
Display available commands
Display available commands
