DA1907LX Ditto
DA1907LX Ditto
DA1907LX Ditto
DA1907LX Ditto----Amp 1
Amp 1
Amp 1
Amp 1----In, 2
In, 2
In, 2
In, 2----Out VGA DA
Out VGA DA
Out VGA DA
Out VGA DA
User’s Guide
400-0045-007
1
Welcome!
We greatly appreciate your purchase of the DA1907LX Ditto-Amp. We are
sure you will find it reliable and simple to use. Superior performance for
the right price, backed by solid technical and customer support is what
ALTINEX has to offer.
We are committed to providing our customers with
Signal Management Solutions
®
to the most demanding audiovisual
installations at very competitive pricing and we welcome you to join the
ranks of our many satisfied customers throughout the world.
1. Precautions and Safety Warnings
Please read this manual carefully before using your DA1907LX. Keep this
manual handy for future reference. These safety instructions are to ensure
the long life of your DA1907LX and to prevent fire and shock hazards.
Please read them carefully and heed all warnings.
1.1 General
•
Qualified ALTINEX service personnel or their authorized
representatives must perform all service.
1.2 Installation Precautions
•
To prevent fire or shock, do not expose this unit to water or moisture.
Do not place the DA1907LX in direct sunlight, near heaters or
heat-radiating appliances, or near any liquid. Exposure to direct
sunlight, smoke, or steam can harm internal components.
•
Handle the DA1907LX carefully. Dropping or jarring can damage the
unit.
•
Do not pull any cables that are attached to the DA1907LX.
1.3 Cleaning
•
Clean only with a dry cloth. Never use strong detergents or solvents
such as alcohol or thinner. Do not use a wet cloth or water to clean
the card.
1.4 FCC Notice
•
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
•
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions found herein, may cause harmful
interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own
expense.
•
Any changes or modifications to the unit not expressly approved by
ALTINEX, Inc. could void the user’s authority to operate the
equipment.
2. Installation Procedures
Step 1.
Connect the +9V AC adapter input to AC voltage and the output plug to the DA1907LX. Verify the LED in the top right corner of the unit’s front
panel turns on and RED.
Step 2.
Connect the video output from the computer to the computer input connector on the DA1907LX using the cable provided. If a longer cable is
required, make sure that the cable uses internal coaxial cables and that the cable is not excessively long.
Step 3.
Verify the LED on the face of the unit changes from RED to GREEN indicating an active signal is present. If the LED is not GREEN, the computer may
not be sending video signals.
NOTE: If using a laptop computer, the laptop may need to be set to output the display on the external video port manually.
Step 4.
Connect the display devices (monitors and/or projectors) to Outputs 1 & 2 of the DA1907LX.
Step 5.
Verify the picture quality on both displays is good. If there is no signal, make sure that the display is compatible with the resolution of the computer
graphics card.
Step 6.
The DA1907LX is now operational.
3. Limited Warranty/Return policies
Please see the ALTINEX website at www.altinex.com for details on warranty and return policies.
