altimo BIH600T1B, Instruction Manual

Page: 13 / 27

Installing your induction hob
Bringing it all together
13
•
Apply the supplied one-sided self-adhesive sealing tape all
the way around the lower edge of the cooktop. Do not
stretch it.
•
Screw the 4 worktop mounting brackets in to the side walls
of product.
•
Insert the appliance into the aperture.
Electrical connection and safety
WARNING : The electrical connection of this appliance
should be carried out by an authorised service person or
qualified electrician, according to the instructions in this
guide and in compliance with the current local regulations.
WARNING: THE APPLIANCE MUST BE EARTHED.
•
Before connecting the appliance to the power supply, the
voltage rating of the appliance (stamped on the appliance
identification plate) must be checked for correspondence to
the available mains supply voltage, and the mains electric
wiring should be capable of handling the appliance’s power
rating (also indicated on the identification plate).
•
During installation, please ensure that isolated cables are
used. An incorrect connection could damage your appliance. If
the mains cable is damaged and needs to be replaced this
should be done by a qualified person.
•
Do not use adaptors, multiple sockets and/or extension leads.
•
The supply cord should be kept away from hot parts of the
appliance and must not be bent or compressed. Otherwise the
cord may be damaged, causing a short circuit.
•
A multi-pole isolator switch (with at least 3 mm contact
spacing) must be used in order to meet the safety regulations.
•
The isolation switch must be easily accessible once the
appliance has been installed.
•
Ensure all connections are adequately tightened.
•
Fix the supply cable in the cable clamp and then close the
cover.
•
The terminal box connection is placed on the terminal box
PE PE
3 2 1
L3 L2 L1
2 1
L
Worktop
mounting bracket
Self-
adhesive
sealing tape