Altimium
www.altimium.com
Ultra-thin HDMI2.0 Extender
2
Features
Supports 4K/UHD/60Hz/4:4:4.
Supports HDMI2.0 & HDCP2.2, and is backward compatible to the previous version.
Maximum transmission distance is up to 40m for 4Kx2K, and 70m for 1080p.
Supports CEC, IR and RS232 pass-through for long-distance control.
Supports bi-directional PoC for simplified wiring.
Supports HDR.
Features DIP switch for choosing mode from: Control, Update A, Update B.
Panel Description
Transmitter
Receiver
No.
Name
Description
①
MODE Switcher
CTRL: RS232 pass-through control mode.
UPDATE A: Update Valens IC program, connect a PC to the
RS232 port, and then double-click the update file (.bat).
UPDATE B: Update compression IC program, the upgrade
method is the same as the above UPDATE A.
②
Power LED
RED: DC power present.
③
HDMI IN (Transmitter)
Connect with HDMI source.
HDMI OUT(Receiver)
Connect with HDMI display.
④
3-pin Terminal Block
If one is connected with control device (e.g. PC), and the other should
be connected with the third-party that need to be controlled.
⑤
IR IN
Work with far-end IR OUT port, connect with IR Receiver (with carrier)
to collect IR signal to control far-end display device from local.
⑥
IR OUT
Work with far-end IR IN port, connect with IR Emitter to send IR signal
to control input source device from remote.
⑦
HDBT OUT(Transmitter)
Connect to the HDBT IN socket on Receiver via CAT5e/6a cable.
HDBT IN (Receiver)
Connect to the HDBT OUT socket on Transmitter CAT5e/6a cable.
⑧
DC 12V Power Port
Support bi-directional PoC, either ports should be connected with
12V DC 2A power adaptor.
CTRL
UPDATE B
UPDATE A
Tx
Rx
DC 12V
IR OUT
IR IN
HDBT OUT
HDMI IN
1
2
3
4
5
6
7
8
CTRL
UPDATE B
UPDATE A
DC 12V
Tx
Rx
HDMI OUT
HDBT IN
IR OUT
IR IN
1
2
3
4
5
6
7
8
