Altimium SP2H2A-H2, User Manual

Page: 10 / 15

HDMI 2.0 1x2 Splitter with Audio Breakout
6
5. EDID Management
The Extended Display Identification Data (EDID) is used by the source device to match
its video resolution with the connected display.

Predefined EDID settings
The 4-pin DIP switch on the rear panel can be used to set the EDID to a fixed value. Use
the following table to determine the settings for the 4-pin DIP switch for specific video
resolution and audio capabilities. When in the lower (ON) position, each switch
represents “1”, it represents “0” when setting the switch in the upper position.
Switch Status Video Resolution Audio Format
0000
1920x1080p@60Hz 4:4:4 RGB 8bit (Factory
default)
Stereo
0001 1920x1080p@60Hz 4:4:4 RGB 8bit High Definition
0010 1920x1080p@60Hz 4:4:4 RGB 12bit Stereo
0011 1920x1080p@60Hz 4:4:4 RGB 12bit High Definition
0100 3840x2160p@60Hz 4:2:0 RGB 12bit Stereo
0101 3840x2160p@60Hz 4:2:0 RGB 12bit High Definition
0110 3840x2160p@60Hz 4:4:4 RGB 12bit HDR Stereo
0111 3840x2160p@60Hz 4:4:4 RGB 12bit HDR High Definition
1000 1280x800p@60Hz 4:4:4 RGB 8bit Stereo
1001 1920x1200p@60Hz 4:4:4 RGB 8bit Stereo
1010 2560x1600p@60Hz 4:4:4 RGB 8bit Stereo
1011 1280x720p@60Hz DVI No audio
1100 1920x1080p@60Hz DVI No audio
1101 3840x2160p@60Hz DVI No audio