Altimium SCA51T, User Manual

Page: 10 / 48

Compact Scaler Switcher (with PoC)
Altimium 5 www.altimium.com
2.2 Rear Panel
①
AUDIO INPUT
Including 3 HDMI audio & 2 VGA audio inputs
User can choose any one audio (embedded HDMI audio or external input audio) for
HDMI audio input by sending RS232 commands.
②
AUDIO OUTPUT
Audio output port, the audio comes from the input audio corresponding to the
selected video source and mixed with MIC audio.
③
IR OUT
5 in total, connect with IR emitters to control local source devices or SCA51T from
remote, switched along with corresponding video source.
④
IR IN
Connects with IR receiver (with carrier wave only), to receive IR signal send by the
IR remote or remote controller of other input/output device.
⑤
FIRMWARE
USB port, connects with USB flash disk or other storage which is with update file
inside, to update the system firmware.
⑥
RS232
Serial control port, 3-pin captive screw connector, connect with a control device
(such as a computer) to control SCA51T or other devices connected with TP402PR.
⑦
DC 12V
Power port, connect with DC 12V power adapter.
⑧
MIC
a) MIC port
Connect with microphone
b) Dial switch
Including 3 levels: 48V phantom power mode (connect with condenser
microphone), MIC mode (connect with dynamic microphone) and LINE mode
1 2 3
9
a
b
c
d
4 5 6 7
8
10