Scaler Switcher with Digital Amplifier-TN (12 inputs)
Altimium 18 www.altimium.com
Step4.
Set the PC
’s IP address and gateway to the original one.
Step5.
Connect SCA121DTN and PC(s) to the router. PCs in the same LAN are able
to control SCA121DTN asynchronously.
The HDBT port of SCA121DTN is used for TCP/IP control. And all the control
commands are the same as the RS232 command list. Here is the detailed introduction.
4.4.5. Control Scaler SCA121DTN via TCP/IP communication software
(Exampled by TCPUDP software)
1)
Connect a computer and SCA121DTN to the same network. Open the TCPUDP
software (or any other TCP/IP communication software) and create a connection,
enter the IP address and port of SCA121DTN (default IP: 192.168.0.178,
port:4001):
2)
After connect successfully, we can enter commands to control the SCA121DTN, as
below:
