Altimium 2 www.altimium.com
2. Installation procedure
Step 1. Connect one Support (1) and one Support (2) to
HDBaseT Extender (1), and fix them with screws (3*6mm).
Step 2. Connect two Supports (1) to HDBaseT Extender (2)
, and fix them with screws (3*6mm).
Step 3. Connect one panel to the one side of main frame with
screws (3*6mm).
Step 4. According to Step 3, connect another panel to the other
side of main frame with screws (3*6mm).
Step 5. Install two metal rods with screws (3*6mm).
Step 6. Put transmitters or receivers insert the slots, and tighten
the captive screws.
Screw
Metal rods
Screw
