Single Plug-in Card Matrix Switcher
Altimium 27 www.altimium.com
Follow these steps to connect the devices:
Step1.
Connect the TCP/IP port of the MATF12 to Ethernet port of PC with straight-thru
CAT5e/6.
Step2.
Set the PC’s network segment to the same as the MATF12’s.
Step3.
Set the MATF12’s network segment to the same as the router.
Step4.
Set the PC’s network segment to the original ones.
Step5.
Connect the MATF12 and PC(s) to the router. PC(s) within the LAN is able to
control the MATF12 asynchronously.
4.4.2 Control via TCP/IP communication software
(Exampled by TCPUDP software)
1)
Connect a computer and MATF12 to the same network. Open the TCPUDP software
(or any other TCP/IP communication software) and create a connection, enter the IP
address and port of MATF12 (default IP: 192.168.0.178, port:4001):
Router
Internet
PC
CAT5e
TCP/IP
