Encodeur/ Décodeur IP Streaming
01.64.13.31.00
21
No. Name
Description
TRS
Connector
Sleeve
( )
Tip (L)
Note:
This connector illustration applies
to both analog audio input and
output in IPE4K-500 and
IPD4K-500
Note:
When this audio port is connected to an audio
input device, both encoder and decoder will output
the audio device's audio signals instead of that
from the HDMI video source. If this audio port is
connected via an audio cable but no audio signals
are input, you can get picture but no sound. The
situations above do not apply to the HDMI
loop-through port in encoder, which can still output
the AV signals from the video source.
5
Audio Output
AUDIO OUT:
connect this 3.5 mm stereo
tip-ring-sleeve port to an audio output device
such as a speaker and amplifier to output
unbalanced, stereo audio signals.
6
Serial
Communication
RS232
: use this port to perform bi-directional
serial communication and device debug
functions.
When the front panel "MODE" switch is
moved to the "NORMAL" position, connect
this port to a RS232 device such as a
computer to bi-directionally communicate
with a RS232 device at the IP controller
side.
When the front panel "MODE" switch is
toggled to the "DEBUG" position, connect
this port to a RS232 device such as a
