Extendeur Multiformat avec Extension USB pour Soft Codec
Altimium
Typical Application
1.
Connect HDMI/VGA/DP/USB-C source devices to HDMI IN/VGA IN/DP
IN/USB-C IN ports of TX or RX.
Note:
The softcodec provides users to connect BYOD wireless system
to the HDMI IN as a source. Connect the BYOD system HDMI display to
the softcodec HDMI IN port.
2.
Firmly connect display devices such as TV or projector to HDMI OUT
ports of the TX and RX, ensuring both source and display devices are
compatible and correctly configured to accept the signal.
3.
Connect a good quality, well-terminated Cat 5e/6/6a/7 cable with an RJ45
connector wired to 568B standard at both ends from the HDBT OUT ports
of TX to the HDBT IN ports of the RX.
Note:
For more information of cable, please refer to the cable
specification section.
4.
Connect PC to USB HOST ports with USB cables.
5.
Connect USB devices to the USB DEVICE ports of TX and RX.
Combining above 4 and 5 steps--The PC which is followed with the source
which port under the USB HOST port, the white box on the panel represents
one group, when the source is be selected, the host PC in the same group
can be connected to other USB devices (3 devices on TX and 3 devices on
RX). In addition, the USB-C is already built in recognizable function, when
you selected USB-C input, the PC can be connected to other USB device
directly.
Note:
For more information, please refer to USB Control section.
6.
Connects audio system such as an amplifier to the AUDIO OUT port on
RX with the phoenix connector.
7.
Connect a MIC to the LINE IN port on TX and a speaker or earphone to
the LINE OUT port on RX. This is used for audio transmission.
