iFusion SmartStation User Manual
7
After the connection has been established, the Bluetooth button on the iFusion glows with
a steady blue light.
If the connection is lost, the button blinks slowly. When you re-dock or bring the iPhone
back into range, the light glows a steady blue again after it reconnects.
If you try to connect an iPhone to the iFusion while another iPhone is already connected,
the connection request is refused and you see an error message.
While the devices are paired and connected, all sounds will be played through the
iFusion, including key presses and sounds from iPhone applications. You can suppress
key clicks through your iPhone’s
Settings
>
Sounds
menu.
Making and answering calls
You can call a number from your iPhone’s Contacts list, Call log, dial pad, or Favorites list.
If the iPhone is docked when you make a call, the iFusion speaker automatically comes
on unless you pick up the handset.
When a call comes in, both the iPhone and the iFusion ring. To answer the call on the iFu-
sion, either pick up the handset or touch the Speaker button on the iFusion.
To end a call, touch the Speaker button on the iFusion (if you were on speaker) or return
the handset to its cradle.
Switching an iFusion call to the iPhone
You can switch a call from the iFusion to the iPhone, and vice versa.
In Bluetooth Docked mode, just remove the iPhone from the cradle to switch the call to
the iPhone.
In Bluetooth Undocked mode, remove the iPhone from the cradle (if it is docked). Then
tap the iPhone
audio source
button and tap
iPhone
.
