JAG OM LAWN2018r1
Page 26 of 32
b.
Transmitter Detail Screen
The detail screen gives the user a view of the
selected channel’s
transmitter
information in one place; including a history of the
transmitter’
s link status, and
battery use details.
A history of link information is displayed over a user-selectable time scale from
two to sixty minutes (additional time
–
up to 31 days of time-stamped logging is
available via the separate companion computer logging software). Each bar
indicates the minimum number of transceivers the transmitter is linked to for
up to five GTX32 transceivers. If the link is dropped, a red mark shows the
time when it happened.
The user will be able to control the transmitter audio input
level from this screen.
The user may press either the up or down arrow to select
the desired gain setting.
This action will cause the new value to be displayed (in red)
and a “Set” button will appear. The setting is not cha
nged on the transmitter
until the set button is pressed.
Activating another function on the GUI or allowing a 10 second interval without
interaction will abandon the change.
Once the set button is pressed, the system will send a command to the
transmitter to change the setting. When the transmitter acknowledges the
change, the set button will disappear, and the setting color will change back to
white.
Note: When the transmitter is not in link this option will not be available.
Any change made at the GTX24 transmitter to gain setting will also
automatically be recorded and shown on this screen.
