manualshive.com logo in svg

Altera Arria V GZ, User Manual

The Altera Arria V GZ User Manual is now available for free download at manualshive.com, ensuring convenient access to essential instructions for this high-performance product. This comprehensive manual equips users with comprehensive details and troubleshooting guidance, enabling optimal utilization of the Altera Arria V GZ.

Share
Download
background image

4–2

Chapter 4: Parameter Settings

System Settings

Arria V GZ Hard IP for PCI Express

November  2012

Altera Corporation

User Guide

Port type 

Native Endpoint

Root Port

Legacy Endpoint

Specifies the port type. Altera recommends 

Native Endpoint

 for all new 

Endpoint designs. Select 

Legacy Endpoint

 only when you require I/O 

transaction support for compatibility. The 

Legacy Endpoint 

is not 

available for the Avalon-MM Arria V GZ Hard IP for PCI Express.

The Endpoint stores parameters in the Type 0 Configuration Space which 
is outlined in 

Table 7–2 on page 7–2

. The Root Port stores parameters in 

the Type 1 Configuration Space which is outlined in 

Table 7–3 on 

page 7–2

.

PCI Express Base 
Specification 
version

2.1
3.0

Select either the 2.1 or 3.0 specification. 

Application 
interface

64-bit Avalon-ST

128-bit Avalon-ST
256-bit Avalon-ST

Specifies the interface between the PCI Express Transaction Layer and 
the Application Layer. Refer to 

Table 8–3 on page 8–6

 for a 

comprehensive list of available link width, interface width, and frequency 
combinations.

Refer to 

“Avalon Memory-Mapped System Settings” on page 4–12

 to set 

the width of the Application Layer interface for the Avalon-MM Arria V 
GZ Hard IP for PCI Express.

RX Buffer credit 
allocation -
performance for 
received requests 

Minimum

Low

Medium

Determines the allocation of posted header credits, posted data credits, 
non-posted header credits, completion header credits, and completion 
data credits in the 16 KByte RX buffer. The 5 settings allow you to adjust 
the credit allocation to optimize your system. The credit allocation for 
the selected setting displays in the message pane.

Refer to 

Chapter 12, Flow Control

, for more information about 

optimizing performance. The Flow Control chapter explains how the 

RX 

credit allocation 

and the 

Maximum payload size

 that you choose affect 

the allocation of flow control credits. You can set the 

Maximum payload 

size 

parameter on the 

Device

 tab. 

The 

Message

 window of the GUI dynamically updates the number of 

credits for Posted, Non-Posted Headers and Data, and Completion 
Headers and Data as you change this selection. 

■

Minimum

–This setting configures the minimum PCIe specification 

allowed for non-posted and posted request credits, leaving most of 
the RX Buffer space for received completion header and data. Select 
this option for variations where application logic generates many read 
requests and only infrequently receives single requests from the PCIe 
link.

■

Low

–This setting configures a slightly larger amount of RX Buffer 

space for non-posted and posted request credits, but still dedicates 
most of the space for received completion header and data. Select 
this option for variations where application logic generates many read 
requests and infrequently receives small bursts of requests from the 
PCIe link. This option is recommended for typical endpoint 
applications where most of the PCIe traffic is generated by a DMA 
engine that is located in the endpoint application layer logic. 

■

Balanced

–This setting allocates approximately half the RX Buffer 

space to received requests and the other half of the RX Buffer space 
to received completions. Select this option for variations where the 
received requests and received completions are roughly equal.

Table 4–2. System Settings for PCI Express (Part 2 of 4)

Parameter

Value

Description

Summary of Contents for Arria V GZ













































































































































































































































































































Reviews:

No comments

Related manuals for Arria V GZ

Datapath HLink-Optical User Manual preview
HLink-Optical
Brand: Datapath Pages: 13
Cansec P-620-HA Installation Instructions Manual preview
P-620-HA
Brand: Cansec Pages: 14
OWC Mercury Accelsior S Quick Start Manual preview
Mercury Accelsior S
Brand: OWC Pages: 2
Force SPARC/CPCI-520G Technical Reference Manual preview
SPARC/CPCI-520G
Brand: Force Pages: 134
Y-E Data YD-8V14 User Manual preview
YD-8V14
Brand: Y-E Data Pages: 38
One Stop Systems OSS-adaptPCI-PMC Quick Manual preview
OSS-adaptPCI-PMC
Brand: One Stop Systems Pages: 8
Paragon id ASK LoGo User Manual preview
ASK LoGo
Brand: Paragon id Pages: 4
Gigabyte GV-N275UD-18I User Manual preview
GV-N275UD-18I
Brand: Gigabyte Pages: 28
Avermedia LIVE GAMER HD LITE C985E Quick Manual preview
LIVE GAMER HD LITE C985E
Brand: Avermedia Pages: 64
BITMAIN Sophon SC1 User Manual preview
Sophon SC1
Brand: BITMAIN Pages: 7
SimpleTech FlashLink UCF-100 Installation Manual preview
FlashLink UCF-100
Brand: SimpleTech Pages: 4
Orbit Research Orbit Reader 20 User Manual preview
Orbit Reader 20
Brand: Orbit Research Pages: 57
Addi-Data APCIe-040 Technical Description preview
APCIe-040
Brand: Addi-Data Pages: 31
Diablotek V9000-P128 Specification preview
V9000-P128
Brand: Diablotek Pages: 1
Diablotek V6600LE-256A Specifications preview
V6600LE-256A
Brand: Diablotek Pages: 1
ealloora PASS Quick Start Manual preview
PASS
Brand: ealloora Pages: 28
Adaptec AVA-1505A User Reference Manual preview
AVA-1505A
Brand: Adaptec Pages: 30
MOTU PCIe- 424 User Manual preview
PCIe- 424
Brand: MOTU Pages: 14

Brands by name

Popular brands

Load more brands