Step 1
Slide the included T-Slot Nuts into the desired locations on both sides of
the enclosure.
Step 2
Secure the DIN Rails using the supplied screws as shown.
Page-2
Page-3
Got Questions?
We are here to help.
Contact us at:
USA & Canada: 866-660-9434
International: +1 561-660-9434
Enclosure Interior
The NFC Series Enclosures feature an integral T-Slot Nut mounting system
molded into the interior of the enclosure. DIN rails can be mounted easily in
any of the locations inside the enclosure.
T-Slot Nut
Mounting System
T-Slot Nut
& Screw
DIN Rail
DIN Rails for NFC121006 Series Enclosures
DIN Rails for NP141105 Series Enclosures
Install the DIN rails onto the equipment mounting plate as shown using
supplied screws and washers. Threaded holes are provided in the plate
for mounting the DIN rails in (2) locations.
Equipment Mounting Plate
DIN Rails
Installation Note:
DIN Rails can only be installed in NP141105 enclosures that have an
equipment mounting plate. The equipment mounting plate for the
NP141105 enclosures are available from www.ALTELIX.com
(Note: Installing additional DIN Rails will require mounting holes to be drilled in the
equipment mounting plate)
Installation Note:
The T-Slot Nut mounting system can only be used with NFC121006
enclosures without equipment mounting plates. However, the DIN rail can
be directly mounted to the plate.
(Note: Mounting to plate will require mounting holes to be drilled )
