IS0029-A
THIS ANTENNA IS DESIGNED TO BE INSTALLED ONLY BY A TRAINED PROFESSIONAL INSTALLER
READ ALL SAFETY INSTRUCTIONS ON THE REVERSE SIDE OF THIS PAGE BEFORE BEGINNING INSTALLATION
Dish Antenna Installation Instructions
Align the mounting
bracket with the angle
adjustment bracket as
shown and fasten loosley
using four of the seven
3/4”
bolts provided with
the antenna.
Construct the mast clamp
assembly as shown by
feeding the two
3”
bolts
through the holes of the
mast clamp parts and
fastening them with the
nuts.
Fasten the mast clamp
assembly to the angle
adjustment bracket using
the remaining
3/4”
bolts
and the Nut.
Attach the turnbuckle by
guiding the hook through
the hole on the side of the
angle adjustment bracket
and then fasten the
eyebolt side with the
turnbuckle bolt and lock
nut. Feed the alignment
screw into the bracket.
Optional Radio Bracket:
Fasten the radio bracket
to the angle adjustment
bracket using the two
screws provided.
Some radios require our
additional mounting
adapter than can be
fastened to the radio
bracket using the screws
that come attached to it.
Position the antenna on
the mast at the desired
height and tightly fasten
the nuts on the mast
clamp. Use the alignment
screw and the turnbuckle
for precision control over
the antennas
directionality.
Altelix LLC USA: 866-660-WIFI (9434) +1 561-660-9434
Copyright (C) 2017 Altelix LLC. All rights reserved. Altelix and the Altelix logo are Trademarks and/or Registered Trademarks of Altelix LLC.
Specifications are subject to change without notice. See
