Altec SOUNDBLADE IMW545, Owner'S Manual

Page: 7 / 16

Setting Up Your IMW545 Bluetooth Music Receiver
Bluetooth Device Compatibility
Your speaker connects with all Bluetooth devices that support the A2DP profile including iPads, iPhones, iPod
touches, and most smart phones, laptops and tablets.
Pairing a Bluetooth Device with Your Speaker
Slide the ON/OFF SWITCH to the ON position in order to power on your speaker. You will hear an audio signal
to indicate that your speaker is powered on. and a blue LED light will flash five times. Hold you’re your
Bluetooth audio source within a few feet of your speaker, and make sure Bluetooth has been turned on. Your
speaker will automatically prepare to pair, and red and blue LED lights will flash alternately.
Now you are ready to pair your device with your iMW545 speaker.
1. Go to the Bluetooth Manager of your Bluetooth device.
2. Search Bluetooth devices and select “iMW545” to start connecting.
3. Enter “0000” if your device asks for the PIN code.
4. An audio signal will indicate when your speaker is paired with your Bluetooth audio source. Once paired, a
blue LED light flashes once every 5 seconds.
5. Although the unit can only stream audio from one device at a time, it is capable of being paired with up to
eight devices. This means that you only have to enter the PIN code one time for each device.
Connecting a Paired Bluetooth Device
1. You should only need to pair your Bluetooth device with your speaker one time.
2. The next time your Bluetooth device and the unit are in range of each other, and the Bluetooth feature is
turned on, they should automatically connect.
3. The unit will only automatically connect to the last Bluetooth device it was connected to.
4. If your paired device does not automatically connect, navigate to the Bluetooth menu on your device and
select “iMW545” from the list.