Altec AL-SND064-001, User Manual

Page: 14 / 53

On/off Switch Aan/Uit-schakelaar
Aux Jack AUX aansluiting
Micro USB Port Micro USB poort
Volume Control Volumeregeling
Stand Standaard
•
Click / to pause during Bluetooth play and click / to play during Bluetooth pause. Click to
receive calls at Bluetooth state. Hold down the button to refuse the calls.
• Push to – shortly to select songs upwards, keep pushing to decrease the volume.
•
Push to + shortly to select songs downwards, keep pushing to increase the volume.
•
Keep pushing / to turn ON/OFF the speaker
IV. Bluetooth function
1. Turn on the speaker. The white indicator light will flash to detect nearing Bluetooth enabled devices. The
white indicator light will go out if no Bluetooth device is detected within 5 minutes.
2. Pair the speaker with the desired Bluetooth device.
3. Play/pause as desired by pressing /
4. When you want to play music or a movie from another Bluetooth device, disconnect and restart the
Bluetooth speaker. Then re-pair both devices.
V. Aux playback operation
1. Turn the speaker on.
2. Insert an 3.5mm audio cable into the aux jack on the back of the speaker, connecting to any audio device
such as mobile phones or computers with the other port.
3. Press “ / ” to enter mute mode and re-press to release sound.
VI. Charging the speaker
The speaker has a built-in Lithium battery. The battery is rechargeable and provides approximately 2.5 hours of
continuous operation when fully charged.
Use the micro USB cable to charge the speaker. The red indicator light will illuminate and will only go out
when the speaker is fully charged.
VII. Hands-free calls
When Bluetooth speaker is connected successfully to mobile phone, it will beep when calls are
Incoming:
•
Press / to answer/hang up calls
•
Press twice / to replay the last call appealed.