10 May/2003
3-2. Programming Channel Memory
TV/Cable TV function
1. Press Power button to turn on the Nu-View. If power has been turned on, press
Source button to select TV mode. (Ref. 3-1. Selecting Input Source)
2. Each time you press TV/CATV button, TV or Cable TV mode will be selected in
order. If you selected Cable TV, you press System button each time, the STD, HRC,
IRC mode will be selected in order.
Channel Program function
1. Press Scan button to start channel programming. The TV will automatically cycle
through all the TV or Cable TV channels depending on the mode selected, and
store active channels in the channel memory.
2. When channel programming is complete, press CH
▲
or
▼
button to make sure
the channel programming has been done properly.
Add/Erase function
1. Select the channel you want to erase using the CH
▲
or
▼
button, or select the
channel you want to add using the Channel Number button.
2. Press DEL or INS:
!
To erase the channel: Press DEL button indicating that the channel has been
erased from the memory.
!
To add the channel: Press INS button indicating that the channel has been
memorized.
Front view
Power
Source
CH
▲▼
Scan
TV/CATV
System
Insert
Delete
CH Number
