19
Troubleshooting
Symptom
Possible Problem
Solution
iPod didn’t charge
iPod is not installed properly
Remove your iPod from the dock and check for obstructions on the
connectors in the dock and on your iPod. Then reseat it in the dock.
iPod is locked up
Please make sure your iPod is working properly before docking into the unit.
Please refer to your iPod manual for details.
AC adapter isn’t plugged into a wall outlet,
or the connector is not plugged into the
power supply jack on the back of the
speaker system
Plug the AC adapter into a wall outlet and plug the connector into the supply
jack on the speaker system.
Sound is distorted
Volume level is set too high
Decrease the volume.
Sound source is distorted
If the iPod original sound source (MP3) is of poor quality, distortion and noise
are easily noticed with high-power speakers. Try a different audio source such
as a music CD.
Wireless remote doesn’t work
Battery is weak
Replace current battery with a new battery.
Wireless remote is not pointed toward the
speaker system
Point the wireless remote toward the Altec Lansing speaker system and move
within 10 feet of the unit.
No sound from the AUX
IN device, such as an
MP3 player or CD player
connected to the AUX IN jack
Volume on the device is set too low
Increase the volume on the device to approximately ¾ full volume.
Source selector is not set to Aux Out
Set source selector to Aux Out.
