Page 1: ......
Page 2: ...ion instructions are given under P 525A power supply The socket into which the transformer is inserted is strapped to provide a load impedance of 150 ohms Other load impedances of 30 and 600 ohms may be obtained by re strapping the socket as indicated on the transformer schematic Because of the great latitude in loading permitted by the cathode follower it is suggested that all load impedances be ...
Page 3: ...r from the P 525A power supply or the outer shell from the 165A base disconnect the power supply from the power line The metal condenser cans in the power supply are at a positive potential to ground and require approximately two minutes to lose the charge after the system is disconnected If the system fails to operate and the pilot lamp does not glow check power line connection and fuse located i...
Page 4: ......
