12
Whenever your iPhone or iPod is docked and your Altec Lansing inMotion
Max speaker system is plugged into an AC outlet, your iPhone or iPod is
charging (until fully charged) – even if the speaker system is switched off.
Listening to the FM Radio
1
Plug the FM radio antenna into the
speaker system’s FM ANTENNA
jack.
The jack is located on the back of the
system.
2
Extend the FM antenna wire fully
for best FM reception. Also, do
not strip, alter or attach to other
antennas.
3
Select “FM” mode.
Press the
button on your speaker system or enhanced
remote until the
appears on the LCD.
4
Tune to the station you want to listen to.
Use the and buttons on your speaker system or enhanced
remote to tune in the desired station. Press and hold these same
buttons to find the next clear FM station.
5
Adjust the volume.
Use the + and – buttons on the Altec Lansing speaker system
to adjust the system volume. Or, use the + and – buttons on the
enhanced remote.
how to Store Preset Stations
Your Altec Lansing speaker system’s enhanced remote enables you to
program up to 4 FM station presets:
1
Tune to the station you wish to store.
While in “FM” mode, use the and buttons on your speaker
system or enhanced remote to tune to the desired station.
2
Store the station.
Press and hold the P1, P2, P3 or P4 button on the enhanced remote
for a few seconds. You can store one FM station in each preset.
3
To store other stations, repeat the above steps.
how to Recall Preset Stations
1
Make sure you are in “FM” mode.
If you’re not in “FM” mode, press the
button on your
speaker system or enhanced remote until the
appears on the LCD.
2
Press a PRESET button (P1, P2, P3 or P4) on the enhanced
remote.
The radio will tune to your preset station.
3
Adjust the volume.
Use the + and – buttons on the Altec Lansing speaker system
to adjust the system volume. Or, use the + and – buttons on the
enhanced remote.
Charging Your iPhone or iPod
