background image

ALP-XP400 

XPEDITION 4

6

Charging External Devices

The Xpedition 4 can charge your phone or 

other portable device.

La bocina puede cargar otro dispositivo portátil.

• Using an approved USB charging cable for 

your device, connect to the USB type A port 

on the back of the Xpedition 4. Connect 

the smaller end to your portable device.

· 

Con el cable de carga USB correcto para su 

dispositivo, conéctelo al puerto USB tipo A en la 

parte posterior de la bocina. Conecte el extremo 

más pequeño a su dispositivo portátil.

• Once connected, you should see the

charging indicator activate on your 

portable device.

· 

Una vez conectado, debe ver que el indicador 

de carga de su dispositivo portátil indica que está

recibiendo una carga.

Note: 

Charging and power ports are 

located behind the waterproof cover on the 

back of the Xpedition 4.

Los puertos de carga y de alimentación se

encuentran detrás de la cubierta impermeable en 

la parte posterior de la bocina.

Weather Resistance (IP67 Rating)

The Altec Lansing Xpedition 4 is IP67 rated, 

meaning it is dust resistant and capable of 

being submerged for up to 30 minutes at a 

depth of 1 meter.  However, that doesn’t mean 

your new speaker is indestructible.  Other 

factors – like the corrosiveness of the liquid 

due to it containing salt or chlorine – can affect 

the overall integrity of the enclosure.  If your 

Xpedition 4 is exposed to any substance other 

than clean water, it’s a good idea to clean the 

unit with a clean, soft cloth.  Give the unit time 

to dry completely before connecting it back to 

mains power.

La bocina tiene una clasificación IP67, lo que 

significa que es resistente al polvo y puede sumergirse 

durante 30 minutos a una profundidad de 1 

metro. Sin embargo, eso no significa que su nueva 

bocina sea indestructible. Otros factores, como la 

corrosividad del líquido debido a que contienen sal 

o cloro, pueden afectar la integridad general del 

recinto. Si su Xpedition 4 está expuesta a cualquier 

sustancia que no sea agua limpia, es una buena idea

limpiar la unidad con un paño limpio y suave. Dele

tiempo a la unidad para que se seque completamente 

antes de volver a conectarla a la red eléctrica.

Note: 

The unit is only protected when the

rear plastic port cover is properly in place, if

not, the unit is not sealed from damage and 

care should be taken to protect it from any 

exposure to liquids or dust.

La bocina solo está protegida cuando la tapa

del puerto de plástico trasero está colocada 

correctamente, de lo contrario, la unidad no está 

sellada contra daños y se debe tener cuidado de 

protegerla de cualquier exposición a líquidos o polvo.

DC IN 12V 10A

AUX IN

USB OUT

5V/2A

Summary of Contents for ALP-XP400









Reviews: