Altana BYK 7085 Operating Instructions Manual Download

Page: 14 / 72

2 | System Description

BYK-Gardner GmbH

spectro2guide Family

295 024 855 E 2010

2.2.2 Rearside

1 Stylus (inserted in instrument):

• Can be used for touching the icons on the screen.

2 USB type C plug:

• Charging: Connect to power supply in order to charge the instru-

ment.

• Data transfer: Connect to PC in order to transfer data between

instrument and software “smart-chart”.

3 Contact plates:

• Used for charging and data connection with docking station.

• Always keep the electrical contacts clean and dry.

4 Button

Operate

Press halfway:

• A camera is switched on that shows the surface to be measured

on the display.

Press completely:

• Instrument is switched off: Turns the instrument on.

• Instrument is switched on: Executes a measurement.

Summary of Contents for BYK 7085








































































Search results

Summary of Contents for BYK 7085

Reviews:

Related manuals for BYK 7085

Brands by name

Popular brands

Altana BYK 7085, Operating Instructions Manual

Search results

Summary of Contents for BYK 7085

Reviews:

Related manuals for BYK 7085

Brands by name

Popular brands